Professional Disinfecting & Fogging Services Winnipeg
Advanced disinfecting and decontamination services using professional-grade products and application methods to help create safer indoor environments following contamination events.
EPA Registered
Products used on every project
ULV & Thermal
Fogging application methods
IICRC Protocols
Followed for remediation projects
Scheduled
Booked around your project
What We Provide
What are professional disinfecting & fogging services?
Professional disinfecting and fogging services use commercial-grade products and specialised application equipment to reduce microbial contamination on surfaces and in the air of affected spaces. These services complement physical remediation and cleaning - they do not replace the need to remove contaminated materials where required.
Our professional disinfecting protocols help reduce microbial contamination and support a cleaner indoor environment following contamination events. We use EPA-registered disinfectants selected for the specific contamination type and occupancy of each project.
A note on realistic outcomes:
Professional disinfecting is one layer of a comprehensive remediation approach. We do not make guarantees of complete sterilisation. Our goal is to support measurably improved indoor environments using appropriate methods and products.
ULV Fogging
Fine-droplet application for large spaces and airborne treatment
Thermal Fogging
Deep penetration for post-fire and severe odour situations
Surface Disinfecting
Direct application for high-contact surfaces and remediated areas
Odour Reduction
Deodorising agents to neutralise odour compounds at the source
Interactive Guide
When disinfecting may be recommended
Select a scenario below to learn why professional disinfecting may be beneficial, typical applications, and what to expect from the treatment.
When disinfecting may be beneficial
Post Mould Remediation
Why it may be beneficial
Following mould remediation, professional disinfecting applications may support the treatment process by addressing residual mould spores and bacteria in the affected area. Disinfecting is often applied as part of a comprehensive remediation protocol.
Typical applications
- Surface disinfecting of remediated areas
- ULV fogging for airborne spore reduction support
- Post-clearance surface treatment
- Cavity and concealed space treatment
What clients can expect
Our technicians apply EPA-registered disinfectants to remediated surfaces following mould removal. Treatment is performed under containment conditions and the area is ventilated per product label requirements before re-occupancy.
Application Methods
Our application methods & products
We select the application method best suited to the contamination type, the size and nature of the space, and the treatment objectives for each project.
ULV Cold Fogging
Large indoor spaces requiring broad surface coverage and air treatment support.
Ultra-Low Volume (ULV) fogging atomises disinfectant solution into very fine droplets (typically 5 to 50 microns) that remain suspended in the air before settling on surfaces throughout the treatment space. ULV foggers do not require heat, making them suitable for heat-sensitive environments.
Thermal Fogging
Post-fire smoke damage and severe organic odour situations requiring deep penetration into porous materials.
Thermal fogging uses a heated mechanism to vaporise deodorising or disinfecting solution into an ultra-fine, smoke-like fog that penetrates deep into porous materials, soft furnishings, and concealed spaces - following the same pathways that odour-causing particles travel.
Surface Disinfecting
Direct surface treatment where precise, documented application is required.
Surface disinfecting involves applying EPA-registered disinfectants directly to contact surfaces using sprayers, cloths, or sponges at the appropriate dilution rate. The disinfectant dwells for the contact time specified on the product label to achieve the stated efficacy.
Post-Remediation Applications
Remediation projects where post-treatment disinfecting is included in scope or required by protocol.
Post-remediation disinfecting is applied following the completion of mould remediation, water damage restoration, or biohazard cleanup to address residual microbial contamination. Applications are coordinated with clearance testing requirements and remediation protocols.
Odour Control Support
Properties where malodours remain following source removal and cleaning, requiring dedicated treatment to neutralise odour compounds.
Professional odour control applications use deodorising agents formulated to neutralise or encapsulate malodour compounds rather than masking them. Applied via thermal or ULV fogging, deodorising agents reach the same spaces that odour-causing particles have contaminated.
On the Job
Trained, protected, and thorough
Our technicians apply professional-grade disinfectants in full protective equipment, using ULV and thermal fogging machines that disperse a fine mist into every corner, crevice, and soft surface - reaching the areas that wiping and spraying miss.
Where We Help
Residential, commercial & remediation applications
We provide professional disinfecting and fogging services for residential properties including single-family homes, condominiums, and multi-family units. All treatments are coordinated with occupants to minimise disruption and ensure re-occupancy is safe and timely.
- Single-family home decontamination
- Basement and crawlspace treatment
- Post-water-damage or mould remediation disinfecting
- HVAC system surface treatment support
- Rental property decontamination between tenancies
- Pre-occupancy environmental cleaning
Related service
Relief Restorations provides full-service restoration alongside professional disinfecting - from initial assessment through to project completion and post-treatment documentation.
Our Process
7-step treatment protocol
Every disinfecting and fogging project follows a consistent, documented protocol from initial consultation through to follow-up recommendations. Tap any step to learn more.
Initial Consultation
We discuss your situation, the nature of the contamination or treatment requirement, and the outcomes you are looking for. This allows us to determine whether professional disinfecting is the appropriate service and to identify the right approach for your situation.
Site Assessment
Product Selection
Application Preparation
Professional Treatment
Ventilation & Safety Review
Follow-Up Recommendations
Step 1 of 7
Initial Consultation
We discuss your situation, the nature of the contamination or treatment requirement, and the outcomes you are looking for. This allows us to determine whether professional disinfecting is the appropriate service and to identify the right approach for your situation.
Duration: 15-30 min
Safety & Transparency
Safety considerations for every project
Professional disinfecting involves chemical applications that require careful adherence to product label requirements. Here is what you need to know.
Occupancy requirements
Occupants, pets, and plants must vacate the treatment area for the duration specified on the product label. We will advise you of specific re-occupancy requirements before treatment begins.
Product label adherence
All disinfectants and deodorising agents are applied strictly per product label requirements - including dilution rates, contact times, and ventilation periods. We do not deviate from label instructions.
Ventilation requirements
Adequate ventilation following treatment is required per product label specifications. We will advise on the ventilation period and can assist with opening windows and adjusting HVAC settings where appropriate.
Sensitive individuals
Please advise our team of any individuals with respiratory sensitivities, chemical sensitivities, or specific medical conditions. This information may influence product selection and re-occupancy timelines.
Technician PPE
Our technicians wear appropriate personal protective equipment throughout all treatment applications, including respiratory protection, eye protection, and chemical-resistant gloves appropriate to the product and application method.
No unsupported claims
We do not claim complete sterilisation or guaranteed elimination of all pathogens. Our professional disinfecting protocols help reduce microbial contamination and support cleaner indoor environments - we present realistic, honest outcomes.
Why Relief
Why choose Relief Restorations
IICRC certified team
Our disinfecting services are performed by IICRC-certified restoration professionals following industry-standard protocols.
Full-service restoration
Disinfecting is part of our comprehensive restoration offering - we handle the full scope from initial assessment to final treatment.
Complete documentation
Treatment records, products used, areas covered, and post-treatment recommendations provided on every project.
Honest, realistic outcomes
We communicate clearly about what professional disinfecting can and cannot achieve - no misleading guarantees.
Coordinated with remediation
Disinfecting is coordinated with mould remediation, water damage, or asbestos projects for seamless project management.
Scheduled to suit your project
Fogging is booked around your remediation or cleaning work so the final treatment fits your timeline.
FAQ
Common questions about disinfecting & fogging
Ready to discuss your disinfecting project?
Whether you’re planning post-remediation treatment or a one-time disinfecting project, our certified team is ready to assess your situation and recommend the right approach - with honest, transparent guidance.
Serving Winnipeg, Selkirk, Steinbach, Portage la Prairie, and all of southern Manitoba